How to enable USB debugging on Android with Black Screen? USB Debugging is probably one of the few features that both experts and regular Android users frequently use. You may have to enable this option to access the contents on your Android phone from a PC. It is also helpful while using some Android management apps. More importantly, you have to enable the USB debugging option to recover data from your Android phone.
Usually, you can go to Settings Developer Options, and enable USB Debugging with a single click. It takes only a few seconds. But what if your Android phone is stuck on a black screen? Well, it could happen when trying to root your device or unlock the bootloader. Some update errors may also cause a black screen. You do not have to worry, though.
In this article, we have explained some of the most effective ways to enable USB debugging on Android with a black screen. Rest assured, all of them are simple.
Enable USB debugging on Android with Black Screen
Method #1 Use A USB Mouse
You can use this method if the touch screen of the Android smartphone is not responsive, but its display has no issues. It means you can turn on the screen using the Power/Home button, but you cannot move around the device.
- You have to connect a USB OTG adaptor to your Android smartphone. These adaptors come cheap, and you can find them almost everywhere.
- You need a USB Mouse that you should connect to the smartphone via the USB OTG adaptor.
- After this, you can navigate through the device using the Right-click, left-click buttons, and the scroll wheel.
- Once you can see the cursor on the screen, you can go to Settings Developer Options and turn on USB Debugging.
Once you have enabled USB Debugging, you can connect the smartphone to your computer to finish various tasks.
Method #2 Using ADB Tools
You can use this method if you cannot use mouse or screen mirroring to access the Android phone. In these circumstances, your best shot is using ADB tools on your system. We must mention that the method is risky when compared to the first two methods. Therefore, you should attempt it only if you have basic knowledge about Android and ADB.
- First, you have to download and install the ADB for your device on your Windows PC.
- You can connect the Android with a black screen via USB and launch the ADB tools.
- Given that you do not have access to the display or the touch panel, you have to reboot the device into Recovery mode.
- The combination for Recovery Mode may vary depending on the device, but it will mostly be the Power button and Volume Up/Down buttons.
- Once your device has rebooted in the Recovery Mode, you have to open the ADB tool. It will be one of those command-prompt utilities.
- Now, you have to type the following command into the Command Prompt window:
- Your PC will now list the devices connected through ADB.
- Once the device has been detected, you can enter the following command:
adb pull / data / media / clockworkmod / backup ~ / Desktop / Android-up
You have to keep in mind that the command mentioned above backs up information from your device. You can explore other commands using the Control Panel, but it is a sensitive thing. You must not try all these commands if you do not have technical knowledge.
Also Read: What is Com Android Incallui?
Method #3 Using Screen Mirroring Feature
You can use this method if the smartphone display is functional, but the touch panel is not. In such situations, you have to use the screencasting/screen mirroring feature on Android. Fortunately, Windows 10 devices come with a built-in option for this. You need to follow quite a few steps, though.
- First, you have to connect your smartphone to the Windows PC using a USB cable
- Since the display is black, you cannot see where you are. So, the best way is to take screenshots. To do it, you can press the screenshot shortcut and check the Screenshot folders on your device storage.
- We recommend keeping the Screenshots folder open so that you can see where you are.
- By following what the screenshots tell you, you can enable Screencasting or Screen Mirroring on the device. It may take a few minutes, but the results must be worth the effort.
- Once you have enabled Screencasting/Screen Mirroring on the Android smartphone, you can see the display on your Windows PC.
- Now, it is easy to use your fingers to navigate through the options and enable USB debugging.
You have to keep in mind that Screen Mirroring does not allow you to use the keyboard or mouse from your Windows PC. Therefore, if you do not have a responsive touchscreen, you will have to get a USB OTG splitter. A USB OTG splitter will help you to connect two devices at once: that is, the mouse and the PC.
As you can see, this process is not effortless, but it gets the job done even when you have an Android with a black screen and unresponsive touch panel. By the way, you need a Windows 10-powered PC, a USB cable, and a splitter to keep things easy.
Method #4 Use an Android Data Recovery Suite
You can use this method if the screen is not accessible, but you do not want to use a mouse/controller. You may have to purchase a premium tool for this, but it will be a good investment. Using a dedicated Android data recovery suite is very easy. Once you connect the device to your PC and launch the tool, it will ask you to accept the request.
The suite will then install apps necessary to enable USB debugging and enable device control. There could be an option to mirror the screen as well. When compared to other methods, it seems easy, but you might have to spend a bit.
Also Read: How to Clear Clipboard on Android
The Bottom Line
You can use the four effective methods to turn on USB debugging on Android with a black screen. We have chosen the methods in a way that people with different device conditions can use them. As it can be seen, there is even a method when you cannot use the display/touch panel.